Unitree G1
by Unitree Robotics · Hangzhou, China · since 2024
$13,500ShippingWhere to buy →Unitree G1 is a 132 cm, 35 kg compact bipedal humanoid from Hangzhou's Unitree Robotics, sold in a base version for demos and events. The base G1 costs $13,500 before tax and shipping, with 23 DoF and about 2 h of battery life. The base G1 lacks actuated hands and does not support secondary development; both require the G1 EDU.
- Height
- 132 cm
- #29 tallest of 42
- Weight
- 35 kg ~
- Lighter than 71% of robots
- Degrees of freedom
- 23
- More joints than 20% of robots
- Runtime
- 2 h ~
- Swappable by hand
- Walking speed
- Not disclosed
- Payload per arm
- 2 kg ~
- Below most robots
Should you buy it?
Unitree G1 suits venues, schools and companies that want a walking humanoid for supervised demos at less than half the US price of the similar AgiBot X2. The G1's side flip is a programmed routine, and the base G1 lacks actuated hands and secondary development support, so custom tasks and object handling need the G1 EDU.
Good forTrade shows and live demosShowrooms and eventsRobotics outreach in schools
Not forCustom robot programmingPicking up and carrying objectsHousehold choresUnsupervised use around the public
Where it wins
- Public price well below the similar AgiBot X2Unitree lists the base G1 at $13,500 on its global online store and in its official spec table, tax and shipping excluded. The similar 131 cm AgiBot X2 costs $33,259 through US reseller RobotShop.See prices →
- Wide joint range for acrobatic motionThe G1 has 23 DoF, with 6 per leg, 5 per arm and 1 in the waist, and up to 90 N·m at the knee. Unitree quotes ±155° of waist rotation and ±158° of hip yaw, and a Unitree video shows a G1 performing a programmed standing side flip.Software specs →
- 3D LiDAR and depth camera as standardEvery G1 carries a depth camera, a 3D LiDAR, a 4-microphone array and a 5 W speaker, with Wi-Fi 6 and Bluetooth 5.2, so the base G1 has the same sensor set as the G1 EDU.All specs →
- Quick-release battery and folding frameThe G1 runs on a 9,000 mAh quick-release smart battery with a 54 V, 5 A charger, and Unitree says the G1 folds to 690 × 450 × 300 mm for transport. The G1 also ships with a manual controller and receives OTA updates from Unitree.Where to buy →
Where it falls short
- No actuated hands on the base modelUnitree lists no hand DoF for the base G1, whose hands are fixed shells, and arm load is about 2 kg, depending on posture. Dex3-1 three-finger hands with 7 DoF each are available only as an option for the G1 EDU, which is sold through sales inquiries.Where to buy →
- No secondary developmentUnitree's store says the base G1 does not support secondary development, so owners cannot run their own code on it. Custom code, the optional Orin computing module and extra waist and wrist joints on the Unitree G1 need the G1 EDU.Movement specs →
- About 2 h per charge and an 8-month warrantyUnitree quotes about 2 h of battery life for the G1 without naming the activity. The base G1 carries an 8-month warranty, against 18 months for the G1 EDU.Battery specs →
- Import costs and customs clearance fall on the buyerUnitree's global store charges $300–1,200 for shipping and leaves customs duties, taxes and import clearance to the buyer. Unitree's website names no local distributor for the US, Europe or Japan.See prices →
- Capability40% weight
- 6.0
- Availability25% weight
- 9.4
- Value20% weight
- 6.8
- Support15% weight
- 6.8
Score by use
- HomeNot its focus
- 8.0
- ResearchNot its focus
- 6.6
- IndustrialNot its focus
- 6.8
- SocialBuilt for it
- 7.4
The same data weighed for each use, e.g. safety and price count most for the home, an open SDK for research. Weights
Would you want one?
- Adult175 cm
-
This robot
G1
132 cm
-
X2
131 cm
-
X2 Ultra
131 cm
-
Bumi
98 cm
-
R1
123 cm
Full specifications
Unitree G1 · charts rank it among all 42 humanoids we track
No spec matches. Try another word or clear the search.
Overview
Where the robot is in its life and what kind of machine it is.
- Status
- Shipping
- Announced
- May 2024
- Locomotion
- Two legs
- Form factor
- Compact humanoid
- AutonomyHow the robot does useful work in its shipping form, not in demo videos.
- Programmed motions
Price
Official price in US dollars. Local prices per region are listed under Where to buy.
- PriceOfficial US price of this version, or our estimate when marked.
- $13,500
- Cheaper than 67% of robots with a price · #6 of 16$4,900 – $103,599
- Price type
- Official price
- Price note
- Base model, no actuated hands; tax and shipping excluded
Size & body
Height decides what it can reach. Weight decides whether two people can lift it.
- Height
- 132 cm 1,320 mm standing
- Taller than 29% of robots · #29 of 4280 cm – 190 cm
- WeightWith battery.
- 35 kg Official, approximate
- Lighter than 71% of robots · #10 of 4211.3 kg – 185 kg
- Shoulder widthDecides whether it fits through doors and aisles.
- 45 cm overall standing width 450 mm
- Folded / transport size
- 690 × 450 × 300 mm
Movement
More joints (degrees of freedom) mean more natural motion and more tasks it can attempt.
- Degrees of freedomAll actuated joints, hands included.
- 23 2 × 6 leg + 1 waist + 2 × 5 arm; no hand DoF on the base G1
- More joints than 20% of robots · #30 of 4217 – 75
- DoF without hands
- 23
- Walking speed
- Not disclosed
- Peak joint torque
- 90 N·m knee, largest joint motor
- Actuators
- Electric rotary
Hands & handling
Without fingers a humanoid can push and pose, but not pick things up.
- Hands
- None fixed hand shells, not actuated; official table lists hand DoF as '/'
- Carrying payloadWhat it can carry with both arms, sustained.
- Not disclosed
- Payload per arm
- 2 kg Official, approximate peak (arm maximum load), varies with arm posture
Battery & power
Runtime is the most common limit in real work. Check how fast the battery is swapped or recharged.
- RuntimePer charge, as stated by the maker.
- 2 h Official, approximate basis not stated by Unitree (battery life about 2 h)
- Longer runtime than 29% of robots · #16 of 3218 min – 8 h
- Battery swap
- Swappable by hand
- Charging
- Plug-in charger
Sensors
What it sees and hears decides whether it can navigate and work around people.
- Cameras
- Depth camera
- Depth sensing
- Depth camera and 3D LiDAR
- Audio
- 4-microphone array, 5 W speaker
Compute & AI
The onboard computer and the AI model decide how much it can do without a remote operator.
- Onboard computer
- 8-core high-performance CPU
- Connectivity
- Wi-Fi 6, Bluetooth 5.2
Software
An open SDK is what makes a robot useful for research. Closed robots only do what the maker ships.
- SDK
- Closed
- Over-the-air updates
- Yes
Safety & compliance
In the EU a CE mark is needed to use a robot at work or in a school.
- Certifications
- Not disclosed
- Dust & water rating
- Not disclosed
- Noise
- Not disclosed
- Intended use
- Civilian robot; secondary development requires the G1 EDU
Support
Warranty and local service matter more than a few hundred dollars.
- Warranty
- 8 months
Sources: Unitree G1 product page and specification table, Unitree official store: Unitree G1, Unitree G1 product page (Chinese, price incl. tax), Unitree official store: shipping policy, Unitree Store / Cooperate page (consumer purchases via official store), Unitree YouTube: G1 launch video (May 13, 2024), Unitree YouTube: G1 mass production version (Aug 19, 2024), Unitree YouTube: G1 side flip, Unitree articles of association (STAR Market listing, Aug 19, 2026), Unitree investor relations. Spotted an error?
G1 vs the alternatives
Pick a rival. Wins are marked per row; height and weight are context, not wins.
| G1 wins 1, loses 1 | Unitree G1 | AgiBot X2 |
|---|---|---|
| Status | Shipping | Shipping |
| Our score | 7.1 | 6.9 |
| Price | $13,500 | $33,259 |
| Degrees of freedom | 23 | 25 |
| Hands | None | None |
| Runtime | 2 h | 2 h |
| Walking speed | — | 0.8 m/s |
| SDK | Closed | Closed |
| Height | 132 cm | 131 cm |
| Weight | 35 kg | 35 kg |
| G1 wins 1, loses 2 | Unitree G1 | AgiBot X2 Ultra |
|---|---|---|
| Status | Shipping | Shipping |
| Our score | 7.1 | 7.3 |
| Price | $13,500 | $55,433 |
| Degrees of freedom | 23 | 30 |
| Hands | None | None |
| Runtime | 2 h | 2 h |
| Walking speed | — | 0.8 m/s |
| SDK | Closed | Open SDK |
| Height | 132 cm | 131 cm |
| Weight | 35 kg | 39 kg |
| G1 wins 1, loses 2 | Unitree G1 | Noetix Bumi |
|---|---|---|
| Status | Shipping | Shipping |
| Our score | 7.1 | 7.3 |
| Price | $13,500 | TBA |
| Degrees of freedom | 23 | 21 |
| Hands | None | None |
| Runtime | 2 h | 2.5 h |
| Walking speed | — | 0.5 m/s |
| SDK | Closed | Open SDK |
| Height | 132 cm | 98 cm |
| Weight | 35 kg | 17 kg |
| G1 wins 1, loses 2 | Unitree G1 | Unitree R1 |
|---|---|---|
| Status | Shipping | Shipping |
| Our score | 7.1 | 7.2 |
| Price | $13,500 | $5,900 |
| Degrees of freedom | 23 | 26 |
| Hands | None | None |
| Runtime | 2 h | 1 h |
| SDK | Closed | Closed |
| Height | 132 cm | 123 cm |
| Weight | 35 kg | 29 kg |
| G1 wins 1, loses 1 | Unitree G1 | AgiBot X2 Neo |
|---|---|---|
| Status | Shipping | Shipping |
| Our score | 7.1 | 6.9 |
| Price | $13,500 | $25,600 |
| Degrees of freedom | 23 | 30 |
| Hands | None | None |
| Runtime | 2 h | 2 h |
| Walking speed | — | 0.8 m/s |
| SDK | Closed | Closed |
| Height | 132 cm | 131 cm |
| Weight | 35 kg | 35 kg |
Where to buy Unitree G1
Prices incl. VAT where sold locally. Import estimates add duties and freight. Checked 30 Oct 2026.
We may earn a commission from seller links. It never affects scores or rankings.
Price history
- Now
- $13,500
- Highest
- $13,500
Official US price of Unitree G1, before sales tax.
Timeline
- 30 Oct 2026Unitree G1 added to the database.
- Oct 2026Unitree's global store lists the base G1 at $13,500 and a G1 Pro at $21,500 Source
- 19 Aug 2026Unitree Robotics lists its shares on the Shanghai Stock Exchange STAR Market Source
- Mar 2025Unitree releases a video of the G1 performing a standing side flip Source
- 19 Aug 2024Unitree shows the mass-production version of the G1 with upgraded performance and appearance Source
- 13 May 2024Unitree introduces the G1 humanoid agent at a starting price of $16,000, tax and shipping excluded Source
G1 in action
Questions buyers ask
About the makerUnitree RoboticsChina · founded 2016What is the difference between the Unitree G1 and the G1 EDU?
The G1 EDU supports secondary development and adds options the base G1 lacks: Dex3-1 three-finger hands with 7 DoF each, 2 extra waist DoF, 2 wrist DoF per arm and a high-compute module such as Orin. Unitree quotes 23–43 DoF, 120 N·m knee torque, about 3 kg arm load and an 18-month warranty for the G1 EDU, which is priced on request.
Can you program the Unitree G1?
Not the base model. Unitree's store says the base G1 does not support secondary development and directs customization buyers to the G1 EDU. The base G1 comes with a manual controller and receives OTA updates from Unitree.
Is the Unitree G1 safe to use around people?
Only with care. Unitree says the G1 has a complex structure and powerful joints and asks users to keep a sufficient safe distance between the robot and people. Unitree also advises individual buyers to understand the limits of humanoid robots before buying.
Does Unitree ship the G1 to Europe?
Yes. Unitree's global online store, run from Hangzhou, lists EU countries in its country selector and sells the G1 in USD. Buyers pay $300–1,200 for shipping plus customs duties, VAT and import clearance, and Unitree publishes no EU price or EU distributor for the G1.
How much does the Unitree G1 cost?
The Unitree G1 costs $13,500 in the US (official). Elsewhere: European Union est. €15,400 (Ships from China; duties, VAT extra); United Kingdom est. £13,200 (Ships from China; duties, VAT extra).
Can you buy the Unitree G1?
Yes. It ships now; you can order it in United States, European Union, United Kingdom, China, Japan and Korea, the rest of the world.
How tall is the Unitree G1?
The Unitree G1 is 132 cm (4′4″) tall and weighs 35 kg (77 lb).
How long does the Unitree G1 battery last?
About 2 h per charge, according to the maker. Swappable by hand.
Does the Unitree G1 have hands?
No, this version has no hands.
Who makes the Unitree G1?
The Unitree G1 is made by Unitree Robotics (China).
Shoppers also looked at
AgiBot
AgiBot X2 Ultra
- Height
- 131 cm
- Weight
- 39 kg
- DoF
- 30
- Runtime
- 2 h
Unitree Robotics
Unitree R1
- Height
- 123 cm
- Weight
- 29 kg
- DoF
- 26
- Runtime
- 1 h